Logitech G25

Charlas generalistas sobre los campeonatos, y simuladores, y pachangas, y...
Avatar de Usuario
memo
Mensajes: 816
Registrado: Dom Dic 19, 2004 11:17 pm
Ubicación: Xixon

Mensaje por memo »

sergiomora escribió:Sí Memo, eso ya lo he visto, pero ya que se tien embrague y H, ¿más divertido usarlo todo, no?

Y luego lo que dice Ogledado. ¿Que pasa si cambias sin pisar el embrague? ¿Sigue haciéndolo automático en GPL o pasa algo raro?

Bueno, pruebalo el finde y ya nos contarás, pero no nos des muche envidia.

Saludos,
Sergio.
Por defecto el GPLShift hace que cuando metas una marcha la engrana sin necesidad de embrague. Tambien se puede configurar para que solo engrane cuando pulses el embrague.

Vamos, que hay opciones para todos los gustos.
Scuderia Paquetown Racing - Este es nuestro año

19 to go!
Avatar de Usuario
F399
Cronometrista oficial
Mensajes: 2004
Registrado: Mar Ene 04, 2005 1:32 pm

Mensaje por F399 »

"Dos de cada tres paquetowns (ya) usan Logitech G25" :lol:

Y el que falta, Chema, está esperándolo, añado.

Pues eso, que aunque el volante me llegó el miércoles, no fue hasta ayer que pude montarlo y probarlo.

La primera impresión sobre el aspecto es que tiene muy buena pinta, sobre todo el volante propiamente dicho. Lo del cambio también pinta bien y los pedales pues, esperaba verlos más robustos o más... no sé, más "reales". En cualquier caso son mejores con mucho que cualquier otra pedalera que haya visto nunca. El metal en el volante me parece algo "débil", sobre todo en las levas. Eso sí, el aro del volante, forrado en cuero, es magnífico. Es algo más delgado y de mayor diámetro que el del Momo, pero creo que no me costará acostumbrarme.

Tras hablar con Memo, decidí configurarlo igual que tenía el Momo para Zandvoort, y dejarme los experimentos con el embrague y el cambio en H para la pretemporada. Resumiendo: cambio secuencial con las levas, ejes separados y ángulo de giro 360º. Eso sí, el embrague lo configuré en el pedal para intentar aprovecharlo en la salida (antes usaba un botón como embrague).

Para ver qué tal me iba decidí empezar por el Glen ya que lo tenía tan reciente y en seguida podría ver si estaba en tiempos competitivos o no.

Bueno, la primera sensación fue esta: ¡¡¡no tiene frenos!!! Sí, el pedal del freno es durísimo y, al llegar el Loop, aplicando la misma fuerza de frenada que solía con el Momo, directamente no frenó nada en absoluto y me fui directo a la valla y quedé boca abajo. Resumiendo: el tacto del freno es muchísimo más duro que en el Momo o en el DFP, pero mucho mucho más. Me costó muchas vueltas pillarle el tranquillo (hasta la vuelta 12 no marqué un 1:07... me salía cada vuelta en el Loop o en Big Bend). Finalmente le cogí el truqui y empecé a frenar como se debe pero... ahora lo que no pillaba era el aire para soltar el freno... Así, tras rodar una impresionante :wink: tanda de tres vueltas sin fallar (1:06, 1:05,9 y 1:05,4) volví a las andadas y a salirme a cada paso por la 90º por soltar el freno demasiado pronto. Eso sí, el tacto del acelerador es genial. Tiene muy poco recorrido pero es extremadamente preciso, igual que la dirección. Cuando se acabó la gasolina pasé a Zandvoort.

Allí tan sólo di unas cinco vueltas y la progresión fue buena: 1:30, 1:30, 1:29 y 1:27. Al ser un circuito de menos frenadas y más de modulación de gas creo que me vendrá bien para el nuevo volante pero, vamos, con algo más (mucho) de entreno creo que podré estar en mis tiempos pronto, pero, vamos, lo que más me va a costar seguro es lo del freno.

Pasado Zandvoort empezaré con el tema embrague, cambio en H y... (redoble de tambores) force feedback...
Forza Ferrari
Avatar de Usuario
ogledalo
Tito Ogglestone
Mensajes: 1894
Registrado: Vie Dic 31, 2004 9:52 am
Ubicación: Barcelona, España
Contactar:

Mensaje por ogledalo »

F399 escribió:"Dos de cada tres paquetowns (ya) usan Logitech G25" :lol:

Y el que falta, Chema, está esperándolo, añado.
Claro, muy fácil, porque vosotros sois un equipo muy performante, y vuestros patrocinadores os adoran, pero a ver con qué cara piden los medianías del ALC (¡¡LOS TRES!!) un volante nuevo. ¿Y quién lo paga? :roll:
"... si no hubiera otra gente en este mundo."
Annelies Marie (Anna) Frank

The really great man is the man who makes everyone feel great.
Avatar de Usuario
memo
Mensajes: 816
Registrado: Dom Dic 19, 2004 11:17 pm
Ubicación: Xixon

Mensaje por memo »

Hoy hice mi primer entrenamiento en serio con el G25 y el GPL año 67. Si bien con el mod del 69 no tuve mayor problema en rodar en mis mejores tiempos, con el GPL original me está costando horrores mantenerme en pista.
La dureza y el tacto de los pedales es muy distinta a la del momo y aún no me he adaptado lo suficiente para tener la precisión que necesita el GPL, asi que a ver si mejoro de aqui al martes de la semana que viene, que sino lo voy a llevar bien jodido.
Scuderia Paquetown Racing - Este es nuestro año

19 to go!
Avatar de Usuario
F399
Cronometrista oficial
Mensajes: 2004
Registrado: Mar Ene 04, 2005 1:32 pm

Mensaje por F399 »

Pues sí, como ya dije, lo más jodido es acostumbrarse al nuevo tacto de los pedales, sobre todo el freno, que es muchísimo más duro. El acelerador también es distinto (tiene un recorrido mucho más corto, aunque más preciso) pero el freno es otro mundo.

Yo ya le he cogido el tranquillo en lo básico, de hecho ya he mejorado mi PB pre-G25 en Zandvoort en más de medio segundo, pero aún así, a veces, mi (escaso) cerebro conecta al modo Momo y freno menos de lo debido y me la doy en Tarzán :( . Eso es lo que más me preocupa de cara a la carrera: mi concentración tendrá que ser mayor que la (escasa) habitual.

Además sigue sin salirme el trail braking como está mandao. Y es que más difícil que pillar el tacto a frenar es pillárselo al modo de soltar el freno... Y ya sabéis lo que dijo mi amigo Jackie Stewart al respecto...

(Y digo "mi amigo" porque tuve ocasión de saludarle en el pasado GP de España. Pero eso ya os lo contaré otro día, jovencitos :wink: ).
Forza Ferrari
Avatar de Usuario
F399
Cronometrista oficial
Mensajes: 2004
Registrado: Mar Ene 04, 2005 1:32 pm

Mensaje por F399 »

Una vez terminada la temporada oficial, en breve me pondré a intentar acostumbrarme al G25 en todo su esplendor, como ya os he comentado en otras ocasiones.

Ya sabéis que hasta ahora he jugado siempre sin FF y cambiando secuencialmente desde las levas, en Zandvoort V he usado ya el pedal de embrague, pero sólo para la salida.

Mi compañero Memo ya me ha dado las primeras pautas para usar el cambio en H: hay que usar un programilla llamado "gplshift". Creo que no tendré problemas con ello por lo que me ha explicado. Ahora bien, lo que más dudas me provoca es una buena configuración del FF. También Lesmes me ha proporcionado los siguientes datos:

Core.ini

allow_force_feedback = 1 ; Use FF if device has it
force_feedback_damping = 100 ; force feedback damping coefficient 0.001
force_feed back_latency = 0.01 ; force feedback latency (secs)
max_steering_torque = 300.0 ; steering torque in N*in giving max device force

Logitech profiler

FF strength: 100%
Damping: 0%
Spring effects: 0%
Centering spring: 0%

¿Algún comentario de los tipos con experiencia? Quisiera decir que al acabar el IV Campeonato hice pruebas con el FF para ver si mejoraba algo o me gustaba. Mi conclusión: poltergeist, me da mucho miedo y no supe conducir con ello. Lo descarté hasta ahora. ¿De verdad es mejor conducir con este fenómeno paranormal en el volante?

Y por último, un dato que me intriga: el ángulo de giro. Yo había usado en el Momo hasta ahora un ángulo de 220º (aunque sin saberlo, no lo había modificado cuando instalé el software). ¿Es un ángulo recomendable o es mejor algún otro? Por curiosidad ¿alguien sabe qué ángulo de giro usaban los coches de 1967 (con saber el del Ferrari ya me valdría, que conste :wink: )?

Nada más, ya os iré contando. Gracias por adelantado.
Forza Ferrari
Avatar de Usuario
_Seninha_
Mensajes: 317
Registrado: Lun Dic 20, 2004 11:28 pm
Ubicación: Asturies, patria querida

Mensaje por _Seninha_ »

A ver, te digo lo que yo tengo para el DFP, aunque en esto del FF cada persona es un mundo y a cada cual le gusta de cierta manera.

Código: Seleccionar todo

allow_force_feedback = 1
force_feedback_damping = 5.000000 ; force feedback damping coefficient
force_feedback_latency = 0.0010000 ; force feedback latency (secs)
max_steering_torque = 150.000000 ; steering torque in N*in giving max device force 
Como ves es sensiblemente diferente a la configuración de Lesmes, los datos los había sacado de alguna pagina dedicada al tema, pero no recuerdo de donde, sorry. Tienes que tener en cuenta que el volante es distinto, por ejemplo en el DFP si pones las cosas muy duras es casi imposible contravolantear por la resistencia del motor, pero por lo que he leido y visto en ese aspecto el G25 es otro mundo.

Respecto a los valores de configuración de windows, tengo un perfil específico para el gpl con los siguientes valores:

Código: Seleccionar todo

FF strength: 70%
Damping: 80%
Spring effects: 80%
Centering spring: desactivado 
Veras que también es diferente a lo de Lesmes. En otros juegos como LFS o rFactor recomiendan ponerlo como lo tiene lesmes, pero en el GPL la verdad es que nose. La cuestion es que en los otros juegos los efectos de Damping y Spring los generan ellos, pero desconozco como trabaja GPL.

Al final es cuestion de probar cosas... yo como soy muy vago pues me quede con la primera configuración que iva bien XD.


Respecto a si usarlo o no, pues cuestion de gustos. Para mi si buscas simulación es fundamental tenerlo activado y con un angulo de giro generoso (yo lot engo en 370, pero desconozco cual es el angulo de giro real de estos coches, estaría bien saberlo). Una vez que te acostumbras es mucho más facil sentir el coche y sus reacciones. Ahora bien, también es más dificil contravolantear y sujetar el coche, si buscas ser lo más competitivo posible quizá lo mejor sea pasar del FF y usar un ángulo de giro relativamente bajo, aunque en este aspecto mejor le preguntas a Gaizka o Carral XD.



Un saludo.

PD: ¿Los que teneis G25, teneis pensado ir con embrague (para todo) a partir de ahora?
Imagen
Avatar de Usuario
F399
Cronometrista oficial
Mensajes: 2004
Registrado: Mar Ene 04, 2005 1:32 pm

Mensaje por F399 »

_Seninha_ escribió:¿Los que teneis G25, teneis pensado ir con embrague (para todo) a partir de ahora?
Sí, esa es mi intención. Pero quiero empezar a probarlo cuanto antes para llegar a la primera prueba del VI lo mejor posible. Gracias por tus indicaciones, las probaré también.

¿Gaizka, Carral, recogéis el guante? :wink:
Forza Ferrari
Avatar de Usuario
Gaizka
Benefactor
Mensajes: 1306
Registrado: Mié Ene 05, 2005 12:44 am
Ubicación: Barcelona 1967
Contactar:

Mensaje por Gaizka »

En este Zartostón quizás encuentres la info que buscabas :wink:

http://www.galeon.com/gtobar100/zandy (parece que no funciona en firefox)

El único consejo que puedo darte es que consigas que el FF no te haga cosas raras en curva. El mío en recta se vuelve loco (pero es por los años, está hecho polvo y no es un diamante como el G25 XD), pero en curva hace lo k debe.

Recuerda, el FF debe ayudarte, nunca perjudicarte.
GPL Rank = -92.907
Avatar de Usuario
F399
Cronometrista oficial
Mensajes: 2004
Registrado: Mar Ene 04, 2005 1:32 pm

Mensaje por F399 »

Gracias Gaizka. Mira que lo había leído tiempo ha... y lo había olvidao. Volveré a releerlo con mucha más atención. Gracias.
Forza Ferrari
Avatar de Usuario
F399
Cronometrista oficial
Mensajes: 2004
Registrado: Mar Ene 04, 2005 1:32 pm

Mensaje por F399 »

Uf, después de probar a poner el FF creo que me reafirmo: no es para mí.

Por otro lado... ¡Memo, ayuda! He instalado el GPL Shift y no pasa nada. No parece funcionar el cambio en H. ¿Cómo lo has hecho tú? ¿Qué hay que hacer aparte de copiar los tres archivos de marras en sierra/gpl y ejecutar el gplpatch? ¿Hay que hacer algo en el Logitech profiler? ¿dentro del gpl quizás?

:?
Forza Ferrari
Avatar de Usuario
Danich
Mensajes: 556
Registrado: Sab Dic 25, 2004 4:25 pm
Ubicación: Asturias, de nuevo

Mensaje por Danich »

F399 escribió:Uf, después de probar a poner el FF creo que me reafirmo: no es para mí.

Por otro lado... ¡Memo, ayuda! He instalado el GPL Shift y no pasa nada. No parece funcionar el cambio en H. ¿Cómo lo has hecho tú? ¿Qué hay que hacer aparte de copiar los tres archivos de marras en sierra/gpl y ejecutar el gplpatch? ¿Hay que hacer algo en el Logitech profiler? ¿dentro del gpl quizás?

:?
Ah carallo! hay que correr con FF!! :latigazo:
Sobre el GPLshif mejor te podrá ayudar Memo, de momento puedes ir abriendo el GPLshift.ini y mirar de configurar bien lo de:
[ Shifter Unit ]
Shifter_Model
Yo con el Joystick me valia con poner "AUTO", quizas con el G25 haya que poner "1.USB"

Un saludo.
Avatar de Usuario
memo
Mensajes: 816
Registrado: Dom Dic 19, 2004 11:17 pm
Ubicación: Xixon

Mensaje por memo »

Yo tengo Shifter_Model = AUTO y con eso ya me funciona :roll:

Abre la carpeta donde tengas instalado el GPL y pon el puntero del ratón sobre el gpl.exe y te visualizará la versión del archivo. La mia es 1.2.0.2. Quizás sea que no tengas instalado alguno de los chorrocientos parches que hay por ahi.

Te pego mi GPLShift.ini entero:

Código: Seleccionar todo


INI v0.730 - DO NOT chance anything on this line! 			   	   
;------------------------------------------------------------------------------
[ Shifter Unit ]                                                               
Shifter_Model = AUTO        ;OPTIONS:   AUTO   #.RSW   #.USB   NONE    ;EFFECT:

                            ;AUTO = AUTOmatic searching for following hardware 
                            ;       via game controller names found in Windows 
                            ;       Game Option list and enabling of current   
                            ;       support if found:       	           

                            ;       ACT LABS Shifters 			   
                            ;       FrexGP 6Speed Hshift+  			   
                            ;       Logitech G25 Shifter connected to wheel    

                            ;The AUTO mode will also support the FrexGP 6Speed 
                            ;Shifter DIRECT if you don´t have installed MS 	   
                            ;SideWinder software, (faster gear shift?) Or	   
                            ;installed with <None> configuration (not faster?) 

                            ;FFShifter notice: 				   
                            ;Must be in "AUTO" mode here to support FFShifter  
                            ;Joystick below (see under "[ FFShifter Support ]")

                            ;You can also try a manual setup if the automatic  
                            ;searching couldn´t find your (homebuild) shifter  
                            ;Try one of these 2 options with a gamedevice num. 

                            ;#.RSW = ACT LABS RS Shifter connected to ACT LABS 
                            ;        Regular or Force RS Wheel   		   

                            ;#.USB = ACT LABS GPL USB Shifter or compatible    

                            ;		       - e.g: -                    

                            ;2.USB = If the ACT LABS Shifter or compatible     
                            ;	 Unit is connected as 2nd. game controller 
                            ;        (ID#2) to a GAME/USB Port/Serial(if supp.)

                            ;1.RSW = If ACT LABS RS shifter is connected to ACT
                            ;        LABS wheel as 1st. game controller (ID #1)
                            ;--------------------------------------------------
                            ;NONE = If you don`t have a Shifter connected to   
                            ;       the ACT LABS Wheel, or want to use another 
                            ;       Shifter utility, e.g. ALShift	    	   
                            ;--------------------------------------------------
Shifting_Behaviour = 1      ;OPTIONS:    1  2  3  4  5  6  7  8  9     ;EFFECT:
                            ;1 =      	   	   			   
                            ;       1       3       5       -                  
                            ;       2       4       6       Rev 		   
                            ;NB: Only this mode works with Logitech G25 Shifter
                            ;------------------------------------------------- 
                            ;2 = Support for the BRM Car left side gearbox     
                            ;       5       3       1       -                  
                            ;       6       4       2       Rev 		   
                            ;NB: All other Cars will run in Mode 1             
                            ;------------------------------------------------- 
                            ;3 = Support for the BRM Car left side gearbox     
                            ;       5       3       1       Rev                
                            ;       6       4       2       -                  
                            ;NB: All other Cars will run in Mode 1             
                            ;------------------------------------------------- 
                            ;4 =				      		   
                            ;       R       1       3       5                  
                            ;       -       2       4      (6)                 
                            ;(6) For BRM Car                                   
                            ;------------------------------------------------- 
                            ;5 = 			                           
                            ;       1       3       5       Rev                
                            ;       -       2       4       (6)                
                            ;(6) For BRM Car                                   
                            ;------------------------------------------------- 
                            ;6 = Shifting behaviour depends of the CAR:        
                            ;BRM CAR with the left GearBox:			   
                            ;       5       3       1       -                  
                            ;       6       4       2       Rev  		   
                            ;                                                  
                            ;All other Cars:		                   
                            ;       R       1       3       5                  
                            ;       -       2       4       -                  
                            ;------------------------------------------------- 
                            ;7 =				                   
                            ;       R       2       4       (6)                
                            ;       -       1       3        5                 
                            ;(6) For BRM Car                                   
                            ;--------------------------------------------------
                            ;8 =      					   
                            ;       R       2       4       (6)                
                            ;       1       3       5        -                 
                            ;(6) For BRM Car                                   
                            ;--------------------------------------------------
                            ;9 =  						   
                            ;       1       3       5        -                 
                            ;       2       4       R        -                 
                            ;--------------------------------------------------
Switch_Between_Modes = OFF  ;OPTIONS:    OFF    ST    #.#     #.##     ;EFFECT:
                            ;OFF, or select a Gamedevice and button number for 
                            ;switch between these modes (1,2,3,4,5,6,7,8 or 9) 
                            ;e.g:                                              
                            ;	1.0  = Using 1st gamedevice 1st button     
                            ;	2.1  = Using 2nd gamedevice 2nd button     
                            ;(Remember GPL counts button from 0)               
                            ;				                   
                            ;                      -- OR  --	   	   
                            ;                  		                   
                            ;ST = Use Shifter STick to select shifteing_Behav. 
                            ;     under GPL upstart (before enter in car/F10)  
                            ;	SLOT 1 = Shifter behaviour Mode 1	   
                            ;	SLOT 2 = Shifter behaviour Mode 2          
                            ;	SLOT 3 = Shifter behaviour Mode 3  etc     
                            ;If you have a ACT LABS Force RS wheel and using   
                            ;its button 11 (right side below on the dashboard) 
                            ;then it will act like this:                       

                            ;BUTTON 11 OUT: "Shifting_Behaviour = #" setting   
                            ;               will be uset                       
                            ;------------------------------------------------- 
                            ;BUTTON 11 IN:  BRM CAR:			   
                            ;       5       3       1       Rev                
                            ;       6       4       2       -                  
                            ;------------------------------------------------- 
                            ;BUTTON 11 IN: For all other CARs:                 
                            ;       R       1       3       5                  
                            ;       -       2       4       -                  
                            ;------------------------------------------------- 
[ Clutch Device ]--------------------------------------------------------------
Clutch_Threshold = 7        ;OPTIONS:         0  5  6  7  8  9         ;EFFECT:
                            ;a number from 5 to 9 for enable this function:    
                            ;0 = OFF  5 = 50%   6 = 60%   7 = 70%   8 = 80%    
                            ;9 = 90%                                           
                            ;This means how much you have to press the Clutch  
                            ;pedal down to allow a GPL gearshift with your AL  
                            ;compatible Shifter unit            		   
                            ;--------------------------------------------------
Clutch_Shift_Sound = 0    ;OPTIONS:          OFF     1     2         ;EFFECT:
                            ;1 = Will run ShftErr.waw, if found in GPL root    
                            ;    each time you have trial to shift gear        
                            ;    without pressed the clutch down (50 to 90%)   

                            ;2 = You can also hear the sound in the replay     
                            ;    And new code (10h) will be stored in the .rpy 
                            ;    file you have saved.	   		   
                            ;--------------------------------------------------
[ CAR RESET ]------------------------------------------------------------------
Button_Number = OFF         ;OPTIONS:       OFF     #.#      #.##      ;EFFECT:
                            ;Select a GameDevice ID number and a button        
                            ;for Reset the CAR (emulate the keyboard Shift R)  
                            ;e.g:                                              
                            ;2.2 (or 2.02) for 2nd gamedevice 3rd Button       
                            ;3.3 (or 3.03) for 3rd gamedevice 4th Button       
                            ;--------------------------------------------------
[ REPLAY START/STOP ]----------------------------------------------------------
Button_Number = OFF         ;OPTIONS:       OFF     #.#      #.##      ;EFFECT:
                            ;Select a GameDevice ID number and a button, for   
                            ;Replay Start/Stop, press the seleted button the   
                            ;1st time: Starts the replay (emulate F2 key)      
                            ;2nd time: Stops replaying & jumps back to Car     
                            ;          (emulate ESC key)                       
                            ;3rd time: Stops pause (emulate pause key)         
                            ;e.g:                                              
                            ;1.1 (or 1.01) for 1st gamedevice 2nd Button       
                            ;4.4 (or 4.04) for 4th gamedevice 5th button       
                            ;--------------------------------------------------
[ LOOK AROUND ]----------------------------------------------------------------
LookAroundMode = OFF        ;OPTIONS:    OFF   #.BUT   #.POV   1.MOU   ;EFFECT:
                            ;BUT = Select a game device # HERE, and buttons    
                            ;      below for LOOK LEFT/RIGHT 45/73/122 degress 
                            ;      (works also together with TrackIR support)  

                            ;POV = Use Point Of View hat for LOOK LEFT/RIGHT:  
                            ;      (works also together with TrackIR support)  

                            ;                                                  
                            ;   POV:     GPL in CAR view:                      
                            ;    |             |                               
                            ;Left up    = Look L   45degree (Standart)         
                            ;Left       = Look L.  73  "    (New)              
                            ;Left Down  = Look L. 122  "    (New)              
                            ;Right up   = Look R.  45  "    (Standart)         
                            ;Right      = Look R.  73  "    (New)              
                            ;Right Down = Look R. 122  "    (New)              

                            ;MOU = Use the mouse for LOOK LEFT/RIGHT 0-122 deg.
                            ;      (up to about 141 degrees in the Replay)	   
                            ;      One right mouse button clik for Un/freeze   
                            ;      the view - Double click for setting back to 
                            ;      front of view (0 degrees) in OFF mode       

                            ;e.g: 3.BUT = Using 3rd game device buttons        
                            ;     2.POV = Using 2nd game device Point of view  
                            ;     1.MOU = Using the mouse or TrackIR in Mouse  
                            ;             Mode (use only number 1 with .MOU)   

                            ; 	    The TrackIR+Buttons Support:	   

                            ;GPLshift+ will enable the TIR support if you have 
                            ;started the NP software, so no need for setup here
                            ;in gplshift.ini, and you can also use the buttons 
                            ;below for Quick 73/122degrees Left/R View together
                            ;with TrackIR´s Look Around, but remember that     
                            ;"LookLRMaxAngle = " may not exceed 60 degrees if  
                            ;you want to use "Look_Left73d_Button =" and	   
                            ;"Look_Right73d_Button" Max. "LookLRMaxAngle = 100"
                            ;for "Look_Left122Button =" "Look_Right122Button ="
                            ;(same limit with TIR+POV)			   
                            ;--------------------------------------------------
                            ;OPTIONS:            #        ##           ;EFFECT:
                            ;(No game device number below, ONLY buttons #!)    

Look_Left45d_Button =       ;Select a number for LOOK LEFT  in  45 degrees     

Look_Left73d_Button =       ;Select a number for LOOK LEFT  in  73 degrees     

Look_Left122d_Button =      ;Select a number for LOOK LEFT  in 122 in degrees  

Look_Right45d_Button =      ;Select a number for LOOK RIGHT in  45 degrees     

Look_Right73d_Button =      ;Select a number for LOOK RIGHT in  73 degress     

Look_Right122d_Button =     ;Select a number for LOOK RIGHT in 122 degrees     

                            ;See in the WhatsNew.txt how to use only 2 buttons 
                            ;for Look 45, 73 & 122 deg. via Double/TripleClick 
                            ;--------------------------------------------------
LookLeftRightDeadZone = 0   ;OPTIONS:   0  1  2  3  4  5  6  7  8  9   ;EFFECT:
                            ;Set the size of DeadZone for MOU/TrackIR mode, e.g

                            ;1 = Min:   |     L     |DZ|     R     |           
                            ;          122          0  0          122 degrees 

                            ;9 = Max:   |   L   |    DZ    |   R   |	   
                            ;          122      0          0      122 degrees  

                            ;0 = No DeadZone                  (9 = about 60%)  
                            ;--------------------------------------------------
                            ;OPTIONS:          0           1           ;EFFECT:
SetDeadZoneViaNumKeyb = 0   ;1 = You can also use the number keyboard´s # 0-9  
                            ;    for changing the DeadZone size, 		   
                            ;    Remember that Num Lock must be on 		   
                            ;    (DeadZone also uset by Look_Up_Down function) 
                            ;--------------------------------------------------
LookLRStartAngle = 0        ;OPTIONS:      #        ##        ###      ;EFFECT:
                            ;Set the start angle you can see with the MOUse    
                            ;compatible device (or TrackIR) up to 122 degrees  
                            ;Please notice: use only number(s)	           
                            ;--------------------------------------------------
LookLRMaxAngle = 45         ;OPTIONS:        ##           ###          ;EFFECT:
                            ;Set the maximum angle you can see with the MOUse  
                            ;compatible device (or TIR) between 20 and 122 deg.
                            ;Please notice: use only number(s)	           
                            ;--------------------------------------------------
Look_Up_Down = 1            ;OPTIONS:          0             1         ;EFFECT:
                            ;1 = Look also up & down with the TrackIR unit in  
                            ;    Enhanced & Vector Expansion mode	   	   
                            ;--------------------------------------------------
ReCenterButton =            ;OPTIONS:        #.#          #.##         ;EFFECT:
                            ;Reset to front of view, for examble with Steering 
                            ;Wheel button, instead of right mouse button       
                            ;Please notice: use only numbers as this e.g 1.3 it
                            ;means using 1st. game controllers 4th. button.    
                            ;This function has only effect in TrackIR Enhanced,
                            ;mode with NatualPoint software v3.11 or higher.   
                            ;ReCenterbutton will also delete the TIR Message   
                            ;--------------------------------------------------
ViewCarEngine&RearWheel = 0 ;OPTIONS:           0         1            ;EFFECT:
                            ;1 = Show the Cars engine & rear wheel in the      
                            ;    LOOK Left/Right 122 degrees view, Notice: This
                            ;    function works only in .BUT/.POV mode.	   
                            ;--------------------------------------------------
[ ZOOM ]-----------------------------------------------------------------------
Zoom_In_Out_Mode = OFF      ;OPTIONS:    OFF    #.BUT    #.POV    KA   ;EFFECT:

                            ;OFF = Zoom in CAR view support Disabled           
                            ;BUT = You select a game device # HERE, and buttons
                            ;      below (up to 4 #) for Zoom In/Out/Reset,    
                            ;POV = Point Of View hat:                          
                            ;KA  = Keyboard ARROW Keys:                        

                            ;      Down  =  Zoom In      (back)                
                            ;      Up    =  Zoom Out     (forward)             
                            ;      Right =  Zoom Set to UserDefineFov          
                            ;      Left  =  Zoom Reset to default position (78)
                            ;--------------------------------------------------
                            ;N.B. If you have choicen POV or KA then you don`t 
                            ;      need to setup any button # below            

                            ;No game device # below, ONLY buttons (up to 4 #)  

Zoom_Out_Button =           ;Select a # for zoom out  			   

Zoom_In_Button =            ;Select a # for zoom in   			   

Zoom_Reset_Button =         ;Select a # for reset zoom to default position (78)

Zoom2UserDefineFOV_Butt =   ;a # for setting ZOOM to "UserDefineFOV =" position
                            ;--------------------------------------------------
                            ;OPTIONS:          ##          ##.#        ;EFFECT:

UserDefineFOV = 78.0        ;Field Of View in degrees: minimun 45.2 - max. 86.2
                            ;(78.0 = Default position)			   

                            ;You can use the keyboards HOME key to save the    
                            ;present FOV ZOOM positions and the setting will be
                            ;uset next time you starting GPL, if you still have
                            ;enabled this [ ZOOM ] support, and will overwrite 
                            ;GEM+2´s Field Of View setting			   

                            ;Notice: This functions has no effect in           
                            ;        [ LOOK AROUND ] TrackIR Vector Expansion  
                            ;        mode except the "UserDefineFOV = " setting
                            ;--------------------------------------------------
[ DRIVER VIEW ]----------------------------------------------------------------
Up&Down = 0                 ;OPTIONS:            0       1            ;EFFECT: 

                            ;0 =   OFF  		        		   
                            ;1 =   Move the Driver View up or down by using    
                            ;      left SHIFT key with ARROW keys:             
                            ;      Up    =  Up                 	   	   
                            ;      Down  =  Down            	   	   
                            ;      Right =  Not uset   			   
                            ;      Left  =  Back to default position  	   

Forward&Back = 0            ;0 =   OFF  		        		   
                            ;1 =   Move Driver View forward or back by using   
                            ;      left CTRL key with ARROW keys:              
                            ;      Up    =  Forward              	   	   
                            ;      Down  =  Back         	   	   	   
                            ;      Right =  Not uset                       	   
                            ;      Left  =  Back to default position  	   
                            ;Notice: These 2 functions has no effect in LOOK   
                            ;        AROUND TrackIR Vector Expansion mode.	   
                            ;--------------------------------------------------
[ TrackIR LIFT ARM ]-----------------------------------------------------------
LiftRightArmLevel = 0       ;OPTIONS:    0    1    2    3    4    5    ;EFFECT:
                            ;0 =    OFF    					   
                            ;1 =    Lift your real right/Left arm (with a DOT) 
                            ;       up to level 1, and the driver In Car View  
                            ;       will do the same (emulate the space key)   
                            ;5 =    Highest level, 	   			   
                            ;Notice: The LOOK AROUND TrackIR/MOU support will  
                            ;        not work if you have enabled this support 
                            ;--------------------------------------------------
[ SEND CHAT MESSAGE ]----------------------------------------------------------
Send_Message_Mode = OFF     ;OPTIONS:      OFF    #.BUT    #.POV       ;EFFECT:
                            ;BUT = Select a game device # HERE, and buttons
                            ;      below (up to 4 #) for sending CHAT message  
                            ;POV = Point Of View hat:                          

                            ;      Up    =  Sending "PO"                       
                            ;      Down  =          "PI"                       
                            ;      Right =          "Sorry!"                   
                            ;      Left  =  Sending "No Problem"               

                            ;Note: It`s ok using same POV for LOOK L/R & Send  
                            ;      CHAT Messager functions, but the POVs Left  
                            ;      & Right positions will be reserve for LOOK  
                            ;      73 degrees                                  

                            ;e.g: 1.BUT = 1st gamectrl. buttons will be uset   
                            ;     3.POV = 3rd gamecontrollers Point Of View hat

                            ;No game device # below, ONLY buttons (up to 4 #)  
                            ;OPTIONS:            #        ##           ;EFFECT:

send_"PO"_button =          ;                                                  

send_"PI"_button =          ;                                                  

send_"Sorry!"_button =      ;                                                  

send"No Problem"button =    ;                                                  
                            ;e.g: 7 = 8th button (GPL counts button # from 0)  
                            ;--------------------------------------------------
[ VOLUME CONTROL ]-------------------------------------------------------------
Volume_Control_Mode = OFF   ;OPTIONS:     OFF    #.BUT    #.POV    KA  ;EFFECT:
                            ;BUT = Select a game device # HERE, and buttons    
                            ;      below (up to 4 #) for change the volume     
                            ;POV = Point Of View hat:                          
                            ;KA  = Keyboard ARROW Keys:                        

                            ;      Up    = Volume up                           
                            ;      Down  =        Down                         
                            ;      Right =        Mute                         
                            ;      Left  =        Normally                     

                            ;e.g: 1.BUT = 1st gamectrl. buttons will be uset   
                            ;     3.POV = 3rd gamecontrollers Point Of View hat

                            ;No game device # below, ONLY buttons (up to 4 #)  
                            ;OPTIONS:            #        ##           ;EFFECT:
Volume_Up_button =          ;                                                  

Volume_Down_button =        ;                                                  

Volume_Mute_button =        ;                                                  

Volume_Normal_button =      ;Set to volume control selected in GPL Options     

[ GPL DISPLAY ]----------------------------------------------------------------
Set_FPS_Display_On = 0      ;OPTIONS:             0    1               ;EFFECT:
                            ;1 = Show FPS display (emulate "ALT F" keys)       
                            ;--------------------------------------------------
[ GPL Font ]-------------------------------------------------------------------
Auto_Set_GPL_Font_Size = 1  ;OPTIONS:         0   1   2   3   4        ;EFFECT:
                            ;1 = Automatic setting of GPL text size, dependent 
                            ;    on GPL resolution, will e.g use optx15b & 16b 
                            ;    font at resolution 1280x1024 instead of the   
                            ;    default size 9b & 10b	         	   

                            ;2 - 4 = Also Auto. setting, but with bigger text  
                            ;        e.g for smaller monitors:     		   

                            ;2 = e.g 17" monitor in high resolution        	   
                            ;3 = e.g 16"        			    	   
                            ;4 = e.g 15" in 1280x1024 (optx20b)                

                            ;Please notice that these setting has no effect on 
                            ;GPLshift´s TrackIR & Shifter message text size	   
                            ;--------------------------------------------------
[ FFShifter Support ]----------------------------------------------------------
FFShifter_Keys_Support = 1  ;OPTIONS:               0    1             ;EFFECT:
                            ;1 = Enable key support for Ghostve´s FFShifter sw.
                            ;if found: W:1 S:2 E:3 D:4 R:5 G:6 Q:Reverse gear  
                            ;--------------------------------------------------
                            ;Do not Initial following FFShifter Joystick in GPL
                            ;for examble in my case Logitech FF Joystick: 	   
                            ;(Max 64 character AND only inside quotation marks)

JoystickNameInWindowsGameOption = "Logitech WingMan Strike Force 3D USB"       

                            ;it should prevent GPL disable FFShifter Joystick´s
                            ;FFB, it means that you will not need to unplug,   
                            ;plug back the Joystick uset by Ghostve´s FFShifter
                            ;software each time starting GPL, and no need for  
                            ;pressing FFshifter Ctrl 1 keys, and I can use all 
                            ;buttons for different functions, except the Joyst.
                            ;Button for for Reverse (hope it works for you)	   
                            ;Please notice that the Shifter unit supp. must be 
                            ;in AUTO mode("Shifter_Mode = AUTO" see at the top)
                            ;to get the FFShifter support to work, AND this has
                            ;only been tested under WinXP Home DK(SP2) & W2K US
                            ;(SP4) with FFShifter´s  6_gear_R.fff Setup under  
                            ;"ForceField File Loaded" 	                   
                            ;--------------------------------------------------
[ GPL AXES ]-------------------------------------------------------------------
Share_All_16_AXES = 0       ;OPTIONS:             0    1               ;EFFECT:
                            ;1 = Share ALL GPL 16 AXES between 3-5 active Game 
                            ;    Controllers, instead of only 2 (first & last) 
                            ;e.g: St. Wheel(3) ext. Pedals(5) Shifter unit(2/0)
                            ;     or Joystick(2-4) used by FFShifter software  
                            ;--------------------------------------------------
DisableUSBshifter2AXES = 0  ;OPTIONS:             0    1               ;EFFECT:
                            ;1 = Will prevent ACT LABS USB Shifter connected to
                            ;    single USB Box (1-IN-1) using 2 AXES, so these
                            ;    can be released to other game controllers e.g.
                            ;    extra 3 Pedals set, using 5 axes       	   
                            ;--------------------------------------------------
; ----------------------------- END of .INI file ------------------------------

Scuderia Paquetown Racing - Este es nuestro año

19 to go!
Avatar de Usuario
F399
Cronometrista oficial
Mensajes: 2004
Registrado: Mar Ene 04, 2005 1:32 pm

Mensaje por F399 »

Pues conmigo no cuentes para el FF...

He probado esas dos cosas que dices tú. Me meto en el GPL y al salir a pista me escribe un mensaje de que ha detectado el G25, pero meto las marchas y allí no pasa nada...

:?
Forza Ferrari
Avatar de Usuario
F399
Cronometrista oficial
Mensajes: 2004
Registrado: Mar Ene 04, 2005 1:32 pm

Mensaje por F399 »

Jarl, mi gpl.exe es el 1.2.0.1 quizá sea eso... vamos, seguro, porque el gplshift.ini lo tengo igual que el tuyo...

¿Cómo paso al gpl.exe 1.2.0.2? That is the question...
Forza Ferrari
Responder